SMD 2835 30 pcs/m Non-Waterproof 2.4W/m 12V

The price is per 1 metre of LED strip. 1 quantity = 1 metre. Up to 30 metres available in a single reel.

SMD 2835 LED Strip (12 V - 2.4 W per m, 30 LEDs/m) - efficient, low-power strip for clean accent and ambient illumination in under-cabinet, joinery, displays, and architectural details.

Key Features

• 30 LEDs per metre
• Cut points: every 3 LEDs (≈ 10 cm)
• adhesive tape on the back of the LED
• Available in 12 V
• High colour rendering (CRI 90+)

Available Colours

• Warm White 3000 K
• Natural White 4000 K
• Cool White 6000 K

Specifications

• LED Model: SMD 2835
• LEDs per Metre: 30 pcs
• Power Consumption: 2.4 W/m
• Input Voltage: DC 12 V
• Recommended Current: ≈ 0.20 A/m
• CRI: 90+
• Viewing Angle: 180°
• Lifespan: > 50 000 hours
• Operating Temperature: −20 °C to +50 °C
• IP Rating: IP20 (non-waterproof)
• Mounting: adhesive tape on the back of the LED
• Warranty: 1 year

12 V Version (2.4 W per m)

• Cuttable every 3 LEDs (≈ 10 cm)
• Input Voltage: DC 12 V
• Max single-end run: 7 m

Powering Longer Runs

• For runs beyond the single-end limit (7 m @ 12 V, 14 m @ 24 V), power from both ends to maintain even brightness. Example: a 24 V installation can achieve up to ~35 m total with consistent light when powered from both ends (14 m + 14 m + ~7 m centre overlap).

Selecting the Right LED Driver

Use our Power Supply Calculator below to automatically find the correct driver for your strip length and wattage, no manual calculations needed.

Need Help or a Custom Setup?

We can solder custom wires directly to your LED strips, prepare pre-cut lengths to your measurements, and supply the correct power supply, fully tested and ready to install. We also offer complete ready-to-install kits that include LED strip + aluminium channel + controller + power supply, with the strip already professionally installed into the channel. Our team can handle all calculations and assembly for you. Simply call us or get in touch online for quick assistance.