Australian LED Strip Lighting Specialists · Australia-wide dispatchMon to Fri · 10am - 5pm · Hoppers Crossing
Home  /  Marble Backlight LED Sheet 24V 3000K - 480x240mm Cuttable Modular Panel

Marble Backlight LED Sheet 24V 3000K - 480x240mm Cuttable Modular Panel

SKU: VL-LP252-24WW
$46.50inc. GST
● In stock

Product details

The Marble Backlight LED Sheet 24V 3000K is a flexible, modular LED panel for even, dot-free backlighting of marble, onyx and other translucent stone. It also suits signs, lightboxes, display cabinets and shop features. Priced per sheet (480 x 240mm).

Unlit marble The same marble backlit with the LED sheet

Before and after: the same marble, unlit and backlit.

Key features:

  • Made for backlighting marble and onyx
  • Even, wide light in Warm White 3000K
  • Cut along the marked section lines: cut pieces keep working
  • Plug-and-play JST connectors, no soldering
  • 3M adhesive backing; the flexible board follows slight curves
  • Chains sheet to sheet

Package includes: 1 LED sheet (480 x 240mm), 2 JST-to-JST jumper cables to chain sheets, and 1 JST-to-bare-wire lead for your 24V power supply.

Planning your layout:

  • With the cables plugged in, each sheet takes about 500 x 250mm. Lay the sheets close together so there are no dark gaps.
  • Keep the LEDs about 50mm behind the stone, so the light spreads and no hot spots show through.

Longer runs: one feed can't power any number of sheets. As a guide, feed power every 4 to 5 sheets (about 72 to 90W per feed), depending on cable length.

Dimming: it runs on a 24V constant voltage supply. To dim it, add a 24V PWM single colour dimmer.

You'll also need: a 24V power supply big enough for 18W per sheet (our power supply calculator sizes it).

Specifications

Size480 x 240mm
Power18W
Voltage24V
Colour temperature3000K (Warm White)
Footprint with cablesabout 500 x 250mm
ConnectionJST plug-and-play
Cuttablealong the marked section lines
Beam angle120°
Distance from stoneabout 50mm
IP ratingIP20, indoors and dry
Life50,000+ hours